laneige Time Freeze Eye Serum

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Butylene Glycol
3. Dimethicone
4. Glycerin
5. Pca Dimethicone
6. Butyrospermum Parkii Butter
7. Pentaerythrityl Tetraethylhexanoate
8. Dimethicone/Vinyl Dimethicone Crosspolymer
9. Ceratonia Siliqua Fruit Extract
10. Dipalmitoyl Hydroxyproline
11. Laminaria Cloustoni Extract
12. Hydroxypropyl Bispalmitamide Mea
13. Copper Tripeptide-1
14. Lysine
15. Arginine
16. Histidine
17. Glucose
18. Mannose
19. Xylose
20. Fucose
21. Prunus Persica Leaf Extract
22. Tillandsia Usneoides Extract
23. Potassium Chloride
24. Magnesium Chloride
25. Calcium Chloride
26. Sodium Chloride
27. Lecithin
28. Adenosine
29. Thymol Trimethoxycinnamate
30. Hydroxypropyl Starch Phosphate
31. Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer
32. Glyceryl Stearate
33. Cetearyl Alcohol
34. Glyceryl Stearate Citrate
35. Hydrogenated Vegetable Oil
36. Polymethyl Methacrylate
37. Ammonium Acryloyldimethyltaurate/Vp Copolymer
38. Stearic Acid
39. Palmitic Acid
40. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
41. Tromethamine
42. Kaolin
43. Propanediol
44. Ethylhexylglycerin
45. 1,2-Hexanediol
46. Sodium Phosphate
47. Potassium Phosphate
48. Hydrolyzed Millet
49. Stearyl Behenate
50. Inulin Lauryl Carbamate
51. Polyglyceryl-3 Methylglucose Distearate
52. Polysorbate 20
53. Disodium Edta
54. Phenoxyethanol
55. Fragrance

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains PEGContains EU-26 allergensContains fragrance

Formulation view Eye serum with silicone and butylene glycol base. Contains copper peptide, lipids, and carob extract for barrier repair. Factory note: active peptides are fragile; avoid direct contact with strong chelators and use low-temperature processes to preserve bioactivity.

Key ingredients

ANTIPLAQUE

Water

HUMECTANT

Butylene Glycol

ANTIFOAMING

Dimethicone

DENATURANT

Glycerin

HAIR CONDITIONING

Pca Dimethicone

SKIN CONDITIONING

Butyrospermum Parkii ButterDimethicone/Vinyl Dimethicone Crosspolymer

SKIN CONDITIONING - EMOLLIENT

Pentaerythrityl Tetraethylhexanoate

Other ingredients

Ceratonia Siliqua Fruit ExtractDipalmitoyl HydroxyprolineLaminaria Cloustoni ExtractHydroxypropyl Bispalmitamide MeaCopper Tripeptide-1LysineArginineHistidineGlucoseMannoseXyloseFucosePrunus Persica Leaf ExtractTillandsia Usneoides ExtractPotassium ChlorideMagnesium ChlorideCalcium ChlorideSodium ChlorideLecithinAdenosineThymol TrimethoxycinnamateHydroxypropyl Starch PhosphateVinyl Dimethicone/Methicone Silsesquioxane CrosspolymerGlyceryl StearateCetearyl AlcoholGlyceryl Stearate CitrateHydrogenated Vegetable OilPolymethyl MethacrylateAmmonium Acryloyldimethyltaurate/Vp CopolymerStearic AcidPalmitic AcidAcrylates/C10-30 Alkyl Acrylate CrosspolymerTromethamineKaolinPropanediolEthylhexylglycerin1,2-HexanediolSodium PhosphatePotassium PhosphateHydrolyzed MilletStearyl BehenateInulin Lauryl CarbamatePolyglyceryl-3 Methylglucose DistearatePolysorbate 20Disodium EdtaPhenoxyethanolFragrance

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Pca Dimethicone

Modified silicone for smoothness and shine; occlusive, suitable for dry hair, avoid excess on oily face.

Butyrospermum Parkii Butter

Shea butter for occlusive moisturizing; high melt point, rich texture, caution for oily skin.

Pentaerythrityl Tetraethylhexanoate

Esther emollient for a light, silky feel; heavy at high concentrations.

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Ceratonia Siliqua Fruit Extract

Carob fruit extract, rich in polysaccharides for hydration and film; natural preservative potential requires efficacy verification

Dipalmitoyl Hydroxyproline

Lipid peptide for skin conditioning; mimics ceramide function for barrier repair, prone to crystallization

Laminaria Cloustoni Extract

Not decoded yet

Hydroxypropyl Bispalmitamide Mea

Bio-inspired lipid emulsifier/conditioner providing smooth feel; ester-based surfactant.

Copper Tripeptide-1

Copper Tripeptide-1 (GHK-Cu) for repair/anti-aging at 0.01–0.1%; water-soluble, avoid chelators.

Lysine

Amino acid conditioner for anti-static hair care; low irritation at typical cosmetic concentrations.

Arginine

Arginine for moisturizing/conditioning; amino acid, high biocompatibility, often used in blends.

Histidine

Amino acid humectant and antistatic agent; pH-dependent behavior, consider buffering in formulation.

Glucose

Low-MW humectant and buffer; high hygroscopicity requires careful preservation and humidity control.

Mannose

Monosaccharide humectant that binds glycosaminoglycans to enhance hydration; extremely low allergenicity

Xylose

Low-MW humectant and fragrance carrier; <5% typical, blends with polyols for texture.

Fucose

Fucose monosaccharide; used as antioxidant precursor or humectant, low dose, acts with other actives

Prunus Persica Leaf Extract

Peach leaf extract, used for emollience and moisturizing; a botanical for gentle skin conditioning.

Tillandsia Usneoides Extract

Not decoded yet

Potassium Chloride

Viscosity modifier for gels and shampoos; high concentrations may cause local stinging.

Magnesium Chloride

Inorganic salt for thickening and pH adjustment; 0.1-1%, avoid calcium ions

Calcium Chloride

Cross-linker and viscosity controller for gels; astringent at high levels, check skin tolerance

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Lecithin

Phospholipid emulsifier at 1-5%; biocompatible, moisturizing/antioxidant, prone to oxidation (add TBHQ), mild for sensitive skin.

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Thymol Trimethoxycinnamate

Antioxidant and photo-protective agent; stabilizes products

Hydroxypropyl Starch Phosphate

Thickener and bulking agent for creams; 1-5%, avoid cationic systems

Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer

Rheology-modifying silicone polymer for suspension and feel; requires silicone-compatible system

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Glyceryl Stearate Citrate

Emulsifying stabilizer and emollient at 2–5%; provides creamy texture, check compatibility with anionic surfactants

Hydrogenated Vegetable Oil

Occlusive emollient for smooth feel; high levels may be comedogenic, use caution for acne-prone skin

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Cationic polymer providing suspension, thickening, and conditioning; often paired with anionic thickening systems, low usage, imparts slip.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Palmitic Acid

Palmitic acid for emulsification/emollient; solid fat, high melting point, occlusive.

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Tromethamine

pH adjuster, alkaline; precise dosing required

Kaolin

Kaolin absorbent and bulk for powders/masks; check for heavy metals and comply with EU colorant limits IV/119

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Sodium Phosphate

Phosphate buffer and anti-seborrheic; pH regulator, aids sebum control, high levels are irritating

Potassium Phosphate

pH adjuster for buffering systems; 0.1-1%, avoid calcium and magnesium ions

Hydrolyzed Millet

Hydrolyzed millet with peptides; small molecules for penetration, moisturizing, sensitive skin friendly

Stearyl Behenate

Not decoded yet

Inulin Lauryl Carbamate

Modified inulin surfactant, mild emulsification/cleansing; prebiotic, reduced irritation

Polyglyceryl-3 Methylglucose Distearate

Non-ionic emulsifier at 1–3%; mild, easily combined with other surfactants.

Polysorbate 20

Non-ionic emulsifier and cleansing surfactant; contains PEG, control microbial load.

Disodium Edta

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Related products in this category

• the-face-shop The Face Shop Cica Peptite Advanced Ampoule
• skinfood Skinfood Yuja C Dark Spot Clear Essence
• the-face-shop The Face Shop Pomegranate And Collagen Volume Lifting Serum
• skinfood Skinfood Gold Caviar Toner
• mediheal Mediheal Hyalu Moist Essence Mask
• mediheal Mediheal Pepta Lifting Ampoule Mask