anasol Protetor Solar Corporal

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Cetearyl Isononanoate
3. Ethylhexyl Methoxycinnamate
4. Diethylamino Hydroxybenzoyl Hexyl Benzoate
5. Titanium Dioxide
6. C12-15 Alkyl Benzoate
7. Octocrylene
8. Ethylhexyl Salicylate
9. Potassium Cetyl Phosphate
10. Butylene Glycol
11. Cyclopentasiloxane
12. Triacontanyl Pvp
13. Ethylhexyl Triazone
14. Glyceryl Stearate
15. Cetearyl Alcohol
16. Cetyl Palmitate
17. Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
18. Dimethicone
19. Phenoxyethanol
20. Alumina
21. Triethanolamine
22. Xanthan Gum
23. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
24. Tocopheryl Acetate
25. Carbomer
26. Disodium EDTA
27. Parfum
28. Decyl Glucoside
29. Simethicone
30. Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate
31. Methylisothiazolinone
32. Propylene Glycol
33. Aloe Barbadensis Leaf Powder

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains EU-26 allergensContains fragrance

Formulation view A broad-spectrum SPF emulsion combining physical TiO2 with organic filters like avobenzone and octocrylene. It uses esters and film-formers to enhance water resistance and skin feel. Preservation relies on a methisothiazolinone/ethanolamine system. Ideal for daily face and body use where high protection and a smooth finish are desired. The blending of volatile silicones and light esters helps mitigate powder heaviness, though high organic filter loads require careful monitoring of photostability.

Key ingredients

SOLVENT

Aqua

SKIN CONDITIONING - EMOLLIENT

Cetearyl Isononanoate

LIGHT STABILIZER

Ethylhexyl MethoxycinnamateDiethylamino Hydroxybenzoyl Hexyl BenzoateOctocryleneEthylhexyl Salicylate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

ANTIMICROBIAL

C12-15 Alkyl Benzoate

Other ingredients

Potassium Cetyl PhosphateButylene GlycolCyclopentasiloxaneTriacontanyl PvpEthylhexyl TriazoneGlyceryl StearateCetearyl AlcoholCetyl PalmitateMethylene Bis-Benzotriazolyl TetramethylbutylphenolDimethiconePhenoxyethanolAluminaTriethanolamineXanthan GumAcrylates/C10-30 Alkyl Acrylate CrosspolymerTocopheryl AcetateCarbomerDisodium EDTAParfumDecyl GlucosideSimethiconePentaerythrityl Tetra-Di-T-Butyl HydroxyhydrocinnamateMethylisothiazolinonePropylene GlycolAloe Barbadensis Leaf Powder

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Cetearyl Isononanoate

Blended ester emollient offering extensibility and lightness; non-comedogenic, good for oily to combo skin

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Octocrylene

UV-B absorber and photostabilizer; has concentration limits, consider potential coral toxicity and allergenicity for specific groups.

Ethylhexyl Salicylate

Ethylhexyl salicylate, UVB absorber; volatile, requires combination with UVA filters for broad spectrum.

Potassium Cetyl Phosphate

Cetyl phosphate potassium, O/W emulsifier; pH-sensitive, often requires buffering.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Triacontanyl Pvp

High-MW film former and thickener; gives slip and longevity, high levels risk heavy texture.

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Cetyl Palmitate

Waxy ester increasing viscosity and providing heavy feel; used as emulsifier carrier, low comedogenicity, strong occlusion.

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol

UV stabilizer (UV-326/328) preventing photo-degradation of formulas; has EU concentration limit, used in sunscreens.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Triethanolamine

Triethanolamine for buffering; restricted, limit concentration to avoid high pH and irritation

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Parfum

Fragrance for scent; may contain allergens, caution for sensitive skin, full labeling required.

Decyl Glucoside

Mild alkyl glucoside, biodegradable; foam stabilizer, thickens with fatty alcohols, low allergenicity.

Simethicone

Silicone antifoam and conditioner; non-allergenic, smooth feel

Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate

High-efficiency lipid-soluble antioxidant preventing oil rancidity; very low usage, typically 0.05-0.1%, ensure even distribution, avoid metal-catalyzed oxidation.

Methylisothiazolinone

Strong preservative; high allergy risk, EU restricted for leave-on products, high formulation risk

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Aloe Barbadensis Leaf Powder

Aloe leaf powder for soothing and humectancy; hygroscopic, store dry, can feel tacky at high loads

Related products in this category

• synergie-skin Synergie Skin Suprema-C+ with 20% CMF Tri-acid Complex
• synergie-skin Synergie Skin Vitamin B
• loccitane L´Occitane Aqua Réotier Refreshing Eye Gel
• confianca Confiança Sulfur Soap
• seventyone-percent Seventyone Percent The Blue Lagoon
• florence-by-mills Florence by Mills Spot A Spot