tula face filter blurring & moisturizing primer

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua/Water/Eau
2. Isododecane
3. Cyclopentasiloxane
4. Phenyl Trimethicone
5. Cyclohexasiloxane
6. Dimethicone
7. Ethylhexyl Palmitate
8. Glycerin
9. Cetyl PEG/PPG-10/1 Dimethicone
10. PEG-10 Dimethicone
11. PEG-9 Polydimethylsiloxyethyl Dimethicone
12. Disteardimonium Hectorite
13. Lactococcus Ferment Lysate
14. Pinus Pinaster Bark Extract
15. Glycyrrhiza Glabra Root Extract
16. Curcuma Longa Root Extract
17. Salvia Hispanica Seed Oil
18. Lactic Acid
19. Propanediol
20. Tocopherol
21. Tocopheryl Acetate
22. Xanthan Gum
23. Caprylic/Capric Triglyceride
24. Cellulose Acetate
25. Docosahexaenoic Acid
26. Eicosapentaenoic Acid
27. Acrylates/Ammonium Methacrylate Copolymer
28. Boron Nitride
29. Ethylhexylglycerin
30. Hdi/Trimethylol Hexyllactone Crosspolymer
31. Magnesium Stearate
32. Mica
33. Phosphatidylcholine
34. Phytosphingosine
35. Polyglyceryl-4 Isostearate
36. Polymethylsilsesquioxane
37. Propylene Carbonate
38. Propylene Glycol Stearate
39. Silica Silylate
40. Sodium Benzoate
41. Sodium Chloride
42. Sorbitol
43. Tetrasodium Glutamate Diacetate
44. Phenoxyethanol
45. Titanium Dioxide
46. Iron Oxides
47. Iron Oxides
48. Iron Oxides

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of formaldehyde releasersContains mineral oilContains siliconesContains PEGContains essential oilsContains fragranceContains animal-derived

Key ingredients

溶剂

Aqua/Water/Eau

SKIN CONDITIONING - EMOLLIENT

IsododecaneCyclopentasiloxaneCyclohexasiloxaneEthylhexyl Palmitate

ANTIFOAMING

Phenyl TrimethiconeDimethicone

DENATURANT

Glycerin

Other ingredients

Cetyl PEG/PPG-10/1 DimethiconePEG-10 DimethiconePEG-9 Polydimethylsiloxyethyl DimethiconeDisteardimonium HectoriteLactococcus Ferment LysatePinus Pinaster Bark ExtractGlycyrrhiza Glabra Root ExtractCurcuma Longa Root ExtractSalvia Hispanica Seed OilLactic AcidPropanediolTocopherolTocopheryl AcetateXanthan GumCaprylic/Capric TriglycerideCellulose AcetateDocosahexaenoic AcidEicosapentaenoic AcidAcrylates/Ammonium Methacrylate CopolymerBoron NitrideEthylhexylglycerinHdi/Trimethylol Hexyllactone CrosspolymerMagnesium StearateMicaPhosphatidylcholinePhytosphingosinePolyglyceryl-4 IsostearatePolymethylsilsesquioxanePropylene CarbonatePropylene Glycol StearateSilica SilylateSodium BenzoateSodium ChlorideSorbitolTetrasodium Glutamate DiacetatePhenoxyethanolTitanium DioxideIron OxidesIron OxidesIron Oxides

Skim through

Ingredients explained

Aqua/Water/Eau

Water as solvent/base; main ingredient, microbial control needed, paired with preservatives.

Isododecane

Synthetic hydrocarbon solvent providing dry, silky skin feel; high volatility, non-comedogenic, common in sunscreens and foundations, usage 5-30%.

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Phenyl Trimethicone

Aromatic modified silicone for high gloss and occlusion; inert, non-volatile, may leave surface residue

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Ethylhexyl Palmitate

Synthetic ester emollient with light skin feel; small molecule, slightly comedogenic, use cautiously for acne-prone skin, often blended with other oils.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Cetyl PEG/PPG-10/1 Dimethicone

Silicone surfactant, smooth and mild; regulates rheology and adds antistatic benefits

PEG-10 Dimethicone

Modified silicone for silky feel and shine; PEG structure aids O/W emulsification, used in hair and skin care.

PEG-9 Polydimethylsiloxyethyl Dimethicone

PEG-modified silicone with emulsifying and conditioning properties; ensure low dioxane levels in finished goods.

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Lactococcus Ferment Lysate

Lactococcus lysate; provides amino acids and polysaccharides for moisture, fermentation reduces allergens.

Pinus Pinaster Bark Extract

Bark extract used as an antioxidant; ensure consistent raw material sourcing.

Glycyrrhiza Glabra Root Extract

Liquorice root extract for soothing and brightening; batch variability, watch polyphenol interactions

Curcuma Longa Root Extract

Turmeric root extract, contains curcumin, colorant/antioxidant; high doses may sensitize.

Salvia Hispanica Seed Oil

Chia seed extract rich in omega-3/6; moisturizes and conditions skin, monitor oxidation stability.

Lactic Acid

AHA pH adjuster at 0.5-5%; exfoliation/humectancy, mild at low conc., irritating at high, avoid conflict with alkaline preservatives.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Cellulose Acetate

Film former for mascaras; insoluble in water, requires organic solvents.

Docosahexaenoic Acid

DHA fatty acid for skin conditioning and antistatic; oxidation sensitive, 1 comedogenic rating.

Eicosapentaenoic Acid

EPA fatty acid; highly unstable, requires intense antioxidant protection, oxidizes easily on skin.

Acrylates/Ammonium Methacrylate Copolymer

Anionic polymer for antistatic properties and film formation; common in blow-dry sprays, forms easily washed-off film.

Boron Nitride

Flake-shaped inorganic filler for slip and bulk in powders; control particle size to minimize inhalation risk

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Hdi/Trimethylol Hexyllactone Crosspolymer

Hydrophobic wax for anti-caking; improves slip in powders and cushions

Magnesium Stearate

Anti-caking agent for solids; restricted in injections, control dosage in topicals.

Mica

Mineral colorant for pearlescence; heavy metal screening required

Phosphatidylcholine

Biocompatible emulsifier mimicking sebum; plant/egg derived, check oxidative stability

Phytosphingosine

Phytosphingosine barrier repair ingredient, 0.1–1%; water-soluble, good for dry skin.

Polyglyceryl-4 Isostearate

Emulsifier at 1–5%; mild type, suitable for sensitive skin formulas

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Propylene Carbonate

Inert solvent and viscosity modifier; often used as penetration enhancer, mild at low levels

Propylene Glycol Stearate

Lipophilic humectant and emulsifier at 0.5–5%; very low comedogenicity

Silica Silylate

Silylate silica for anticaking, defoaming, emulsion stabilization, film-forming; improves powder flow/texture

Sodium Benzoate

Preservative booster, effective below pH 4.5; combinable with sorbates

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Sorbitol

Polyol humectant with strong hygroscopy; tacky at high levels, pair with occlusives; also a solvent or adjuster.

Tetrasodium Glutamate Diacetate

Gluconate diacetate tetrasodium chelator; replaces EDTA, improves stability against metals

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Related products in this category

• dibimilano DibiMilano Hydra Perfection Extreme Moisturizing Cream
• baby-dove Baby Dove Rich Moisture Bathing Bar
• eucerin Eucerin Dry Skin Intensive Hand Cream 5% Urea With Lactate
• dear-me-beauty Dear Me Beauty Skin Barrier Water Cream (Improved Formula)
• mincer-pharma MINCER Pharma Daily Care Illuminating Face Cream Mask
• farmstay Farm Stay Sea Horse Water Full Cream