hanskin Super Light Touch Bb

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Titanium Dioxide
2. Zinc Oxide
3. Water
4. Cyclopentasiloxane
5. Butylene Glycol
6. Butylene Glycol Dicaprylate/Dicaprate
7. Dimethicone
8. Cyclohexasiloxane
9. Cetyl Peg/Ppg-10/1 Dimethicone
10. Orbignya Oleifera Seed Oil
11. Arbutin
12. Magnesium Sulfate
13. Glycerin
14. Peg-9 Polydimethylsiloxyethyl Dimethicone
15. Dipropylene Glycol
16. Polyglutamic Acid
17. Talc
18. Sodium Hyaluronate
19. Zea Mays Kernel Extract
20. Palmitoyl Tripeptide-1
21. Butyrospermum Parkii Butter
22. Disteardimonium Hectorite
23. Calcium Stearate
24. Dimethicone/Vinyl Dimethicone Crosspolymer
25. Beeswax
26. Ozokerite
27. Sorbitan Olivate
28. Sorbitan Isostearate
29. Silica
30. Triethyl Citrate
31. Triethoxycaprylylsilane
32. Hydrogen Dimethicone
33. Adenosine
34. Hydrogenated Lecithin
35. Disodium Edta
36. Phenoxyethanol
37. Propylparaben
38. Methylparaben
39. Ci 77491
40. Ci 77491
41. Ci 77499

Highlights

Free of sulfatesFree of formaldehyde releasersContains siliconesContains alcoholContains PEGContains essential oilsContains animal-derivedContains fragranceContains mineral oilContains parabens

Formulation view Water-in-oil system with zinc oxide and titanium dioxide for mineral SPF. Features babassu oil for moisture and glutathione for repair. Lightweight texture suits dry or neutral skin. Factory view: balancing residue after volatile silicones and optimizing shear temperature for oil stability are critical.

Key ingredients

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

ANTIMICROBIAL

Zinc Oxide

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

CyclopentasiloxaneButylene Glycol Dicaprylate/DicaprateCyclohexasiloxane

HUMECTANT

Butylene Glycol

ANTIFOAMING

Dimethicone

Other ingredients

Cetyl Peg/Ppg-10/1 DimethiconeOrbignya Oleifera Seed OilArbutinMagnesium SulfateGlycerinPeg-9 Polydimethylsiloxyethyl DimethiconeDipropylene GlycolPolyglutamic AcidTalcSodium HyaluronateZea Mays Kernel ExtractPalmitoyl Tripeptide-1Butyrospermum Parkii ButterDisteardimonium HectoriteCalcium StearateDimethicone/Vinyl Dimethicone CrosspolymerBeeswaxOzokeriteSorbitan OlivateSorbitan IsostearateSilicaTriethyl CitrateTriethoxycaprylylsilaneHydrogen DimethiconeAdenosineHydrogenated LecithinDisodium EdtaPhenoxyethanolPropylparabenMethylparabenCi 77491Ci 77491Ci 77499

Skim through

Ingredients explained

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Butylene Glycol Dicaprylate/Dicaprate

Light diester emollient, light and non-greasy; often used as solvent; oxidizes easily, needs antioxidants.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Cetyl Peg/Ppg-10/1 Dimethicone

Silicone surfactant, smooth and mild; regulates rheology and adds antistatic benefits

Orbignya Oleifera Seed Oil

Baobab seed oil; highly saturated fat oil. Emollient and nourishing, rich feel, prone to frosting.

Arbutin

Tyrosinase inhibitor for whitening; typical use 1-2%, comply with EU restrictions on specific arbutins.

Magnesium Sulfate

Bulk agent at 0.1–1%; highly water-soluble, avoid high local concentration.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Peg-9 Polydimethylsiloxyethyl Dimethicone

PEG-modified silicone with emulsifying and conditioning properties; ensure low dioxane levels in finished goods.

Dipropylene Glycol

Solvent for essential oils; better humectancy than PEG

Polyglutamic Acid

Natural-derived polypeptide for hydration and skin conditioning; often used for long-lasting moisture

Talc

Inorganic mineral powder for texture and oil absorption; must be asbestos-free; fineness affects skin feel and safety, avoid inhalation.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Zea Mays Kernel Extract

Corn kernel extract acting as thickener or bulking agent; check viscosity impact on formulation

Palmitoyl Tripeptide-1

Palmitoyl Tripeptide-1 for repair; requires lipid carrier, unstable in aqueous phase

Butyrospermum Parkii Butter

Shea butter for occlusive moisturizing; high melt point, rich texture, caution for oily skin.

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Calcium Stearate

Calcium stearate, emulsion stabilizer; restricted IV/150

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Beeswax

Beeswax, natural thickener and film former; provides occlusive moisturization, natural honey scent, animal-derived, potential allergen

Ozokerite

Mineral ozokerite for viscosity and stabilization; derived from mineral oil, highly comedogenic, avoid facial use.

Sorbitan Olivate

O/W emulsifier, HLB ~15, requires ionic co-surfactant, potential sensitizer.

Sorbitan Isostearate

Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Triethyl Citrate

Solvent/plasticizer at 1–10%; provides fresh feel, slight citrus scent

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Hydrogen Dimethicone

Hydrogenated dimethicone for film-forming and slip; low volatility, rich feel for dry skin

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Disodium Edta

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Propylparaben

Medium-chain preservative; restricted use, pH-sensitive efficacy.

Methylparaben

Preservative, narrow spectrum; often combined, check allergen risk and regulatory limits.

Ci 77491

Iron oxides red; physical pigment. Coloring and photo-protective, stable and non-irritating.

Ci 77491

Iron oxides red; physical pigment. Coloring and photo-protective, stable and non-irritating.

Ci 77499

Inorganic colorant manganese dioxide used in cosmetics; restricted use component subject to regulatory limits.

Related products in this category

• yensa Yensa Tone Up Primer Essential Glow
• nars Nars Velvet Matte Skin Tint SPF 30
• nakeup-face Nakeup Face Chok Chok Deep Ampoule Lip Oil
• the-body-shop The Body Shop Make-Up Setting Spray
• e-l-f e.l.f. Cosmetics Jelly Pop Dew Primer
• dr-hauschka Dr Hauschka Coverstick