everysun SPF50 Sunscreen Lotion

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Octocrylene
3. Homosalate
4. Butyl Methoxydibenzoylmethane
5. Ethylhexyl Salicylate
6. Benzophenone-3
7. Potassium Cetyl Phosphate
8. Pvp/Eicosene Copolymer
9. Alcohol Denat
10. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
11. Polymethyl Acrylate
12. C12-15 Alkyl Benzoate
13. Cetearyl Alcohol
14. PEG-8
15. Myristyl Myristate
16. Octyldodecanol
17. Titanium Dioxide
18. Vitis Vinifera Seed Extract
19. Vaccinium Oxycoccos Extract
20. Lycium Chinense Fruit Extract
21. Tocopheryl Acetate
22. Glycerin
23. Propylene Glycol
24. PEG-40 Hydrogenated Castor Oil
25. Glycereth-26
26. Xanthan Gum
27. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
28. Neopentyl Glycol Dicaprylate/Dicaprate
29. Isopropyl Palmitate
30. Sodium Laureth Sulfate
31. Aminomethyl Propanol
32. Triethanolamine
33. Glyceryl Stearate
34. PEG-40 Stearate
35. Ceteareth-20
36. Aluminum Stearate
37. Polyhydroxystearic Acid
38. Alumina
39. Disodium EDTA
40. BHT
41. Citric Acid
42. Sodium Benzoate
43. Sodium Sorbate
44. Fragrance
45. Methylisothiazolinone
46. Decylene Glycol
47. Caprylyl Glycol
48. Phenoxyethanol
49. Benzyl Salicylate
50. Citronellol
51. Geraniol
52. Hydroxyisohexyl 3-Cyclohexene Carboxaldehyde
53. Linalool

Highlights

Free of parabensFree of siliconesFree of essential oilsContains EU-26 allergensContains alcoholContains mineral oilContains PEGContains sulfatesContains fragranceContains formaldehyde releasers

Formulation view Broad-spectrum chemical UV filters combined with titanium dioxide and alcohol for penetration. Emollients and emulsifiers stabilize the lotion, with antioxidant botanical extracts. Ideal for high SPF protection needs. High alcohol content; dry or sensitive skin should assess barrier tolerance.

Key ingredients

ANTIPLAQUE

Water

LIGHT STABILIZER

OctocryleneButyl MethoxydibenzoylmethaneEthylhexyl Salicylate

FRAGRANCE

Homosalate

SURFACTANT - EMULSIFYING

Potassium Cetyl Phosphate

溶剂

Alcohol Denat

HAIR CONDITIONING

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

Other ingredients

Benzophenone-3Pvp/Eicosene CopolymerPolymethyl AcrylateC12-15 Alkyl BenzoateCetearyl AlcoholPEG-8Myristyl MyristateOctyldodecanolTitanium DioxideVitis Vinifera Seed ExtractVaccinium Oxycoccos ExtractLycium Chinense Fruit ExtractTocopheryl AcetateGlycerinPropylene GlycolPEG-40 Hydrogenated Castor OilGlycereth-26Xanthan GumAcrylates/C10-30 Alkyl Acrylate CrosspolymerNeopentyl Glycol Dicaprylate/DicaprateIsopropyl PalmitateSodium Laureth SulfateAminomethyl PropanolTriethanolamineGlyceryl StearatePEG-40 StearateCeteareth-20Aluminum StearatePolyhydroxystearic AcidAluminaDisodium EDTABHTCitric AcidSodium BenzoateSodium SorbateFragranceMethylisothiazolinoneDecylene GlycolCaprylyl GlycolPhenoxyethanolBenzyl SalicylateCitronellolGeraniolHydroxyisohexyl 3-Cyclohexene CarboxaldehydeLinalool

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Octocrylene

UV-B absorber and photostabilizer; has concentration limits, consider potential coral toxicity and allergenicity for specific groups.

Homosalate

UVB sunscreen agent, often combined with others; stable but migratory; ensure regulatory compliance.

Butyl Methoxydibenzoylmethane

High-potency UVA filter (Parsol MXX); requires stabilizers and UVB blockers.

Ethylhexyl Salicylate

Ethylhexyl salicylate, UVB absorber; volatile, requires combination with UVA filters for broad spectrum.

Benzophenone-3

Not decoded yet

Potassium Cetyl Phosphate

Cetyl phosphate potassium, O/W emulsifier; pH-sensitive, often requires buffering.

Pvp/Eicosene Copolymer

Not decoded yet

Alcohol Denat

Denatured ethanol; solvent, penetration enhancer, and quick-dry agent; high % may compromise barrier in dry skin.

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Polymethyl Acrylate

Not decoded yet

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

PEG-8

Not decoded yet

Myristyl Myristate

Di-C14 ester, waxy solid for thickening and conditioning; provides matte and smooth feel, low comedogenicity, good for compacts.

Octyldodecanol

Light emollient/emulsifier at 1-5%; low comedogenic, non-greasy feel, broadly compatible, sensitive-skin friendly.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Vitis Vinifera Seed Extract

Grape seed extract with OPCs; potent antioxidant; used for skin protection and UV support; needs stabilizers.

Vaccinium Oxycoccos Extract

Not decoded yet

Lycium Chinense Fruit Extract

Goji berry extract rich in antioxidants; used for antioxidant and skin protection benefits.

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

PEG-40 Hydrogenated Castor Oil

Solubilizer and emulsifier for oil-soluble ingredients; high concentrations may cause contact dermatitis in sensitive skin.

Glycereth-26

Glycereth-26, humectant/viscosity modifier at 1–5%; non-ionic water-soluble, boosts stability and feel.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Neopentyl Glycol Dicaprylate/Dicaprate

Light emollient ester for fast spreadability and a light feel.

Isopropyl Palmitate

Isopropyl palmitate for dry touch; prone to oxidation, needs antioxidants, low viscosity

Sodium Laureth Sulfate

Common anionic surfactant, strong foam but drying; check cationic compatibility, high eye irritation

Aminomethyl Propanol

pH buffer at 0.1–1%; irritating at high levels, avoid direct mixing with strong acids/bases

Triethanolamine

Triethanolamine for buffering; restricted, limit concentration to avoid high pH and irritation

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

PEG-40 Stearate

Water-soluble emulsifier for O/W; mild cleansing, high levels may be comedogenic, caution for sensitive skin.

Ceteareth-20

Not decoded yet

Aluminum Stearate

Aluminum stearate used as anticaking, emulsion stabilizer, and viscosity controller; restricted to IV/150 uses, avoid direct contact with acids.

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Sodium Benzoate

Preservative booster, effective below pH 4.5; combinable with sorbates

Sodium Sorbate

Not decoded yet

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Methylisothiazolinone

Strong preservative; high allergy risk, EU restricted for leave-on products, high formulation risk

Decylene Glycol

Multi-functional thickener and preservative booster, 0.1–0.5%; low viscosity, good compatibility

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Benzyl Salicylate

UV absorber/light stabilizer, restricted in EU; potential sensitizer, risk assessment needed.

Citronellol

Citronellol for fragrance; EU 26 allergen, labeling required above 0.001%.

Geraniol

Geraniol for fragrance; EU 26 allergen, labeling required above 0.001%.

Hydroxyisohexyl 3-Cyclohexene Carboxaldehyde

Prohibited in EU cosmetics; restricted due to irritation risks.

Linalool

Natural fragrance component at ≤0.05%; one of EU 26 allergens, caution for sensitive skin

Related products in this category

• origins Origins Precipitation Extra Moisturizing Cream
• conscious-chemist Conscious Chemist Indulge Facial Cream
• esfolio Esfolio Coconut Water Cream
• apivita Apivita Tonic Mountain Tea Moisturizing Body Milk
• apivita Apivita After Sun Cool & Sooth Face & Body Gel-Cream
• moogoo MooGoo Spf 40 Tinted Face Cream (Discontinued)