double-zero Double & Zero Double Special Care Hand Mask

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Hydrolyzed Collagen
2. Butylene Glycol
3. Glycerin
4. PEG-8
5. Cetyl Ethylhexanoate
6. Dimethicone
7. Cetearyl Alcohol
8. PEG-40 Stearate
9. Sorbitan Sesquioleate
10. Stearic Acid
11. Hydrogenated Vegetable Oil
12. Beeswax
13. Argania Spinosa Kernel Oil
14. Sodium Hyaluronate
15. Phenoxyethanol
16. 1,2-Hexanediol
17. Caprylyl Glycol
18. Pentylene Glycol
19. Butyrospermum Parkii
20. Theobroma Cacao Seed Butter
21. Carbomer
22. Milk Protein Extract
23. Aloe Barbadensis Leaf Extract
24. Euterpe Oleracea Fruit Extract
25. Urea
26. Illicium Verum Fruit Extract
27. Potassium Hydroxide
28. Fragrance
29. Adenosine
30. Disodium EDTA
31. Sesamum Indicum Seed Extract
32. Glycyrrhiza Glabra Root Extract
33. Cimicifuga Racemosa Root Extract
34. Polygonum Multiflorum Root Extract
35. Phellinus Linteus Extract
36. Angelica Gigas Root Extract
37. Morus Alba Bark Extract
38. Paeonia Lactiflora Root Extract
39. Sophora Angustifolia Root Extract
40. Scutellaria Baicalensis Root Extract
41. Allantoin
42. Magnesium Ascorbyl Phosphate
43. Lactic Acid
44. Citric Acid
45. Malic Acid
46. Ceramide 3

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains animal-derivedContains siliconesContains PEGContains fragranceContains EU-26 allergensContains essential oils

Formulation view Hand mask featuring hydrolyzed collagen as a film-former, paired with butylene glycol and glycerin for hydration. Occlusive phase uses beeswax and hydrogenated oils, enriched with argan oil, shea butter, and herbal extracts (licorice, polygonum) for soothing. Suitable for dry or damaged hands. Formulation insight: High-molecular collagen acts primarily physically; efficacy relies on occlusion and botanical synergy rather than deep penetration.

Key ingredients

ANTISTATIC

Hydrolyzed Collagen

HUMECTANT

Butylene Glycol

DENATURANT

Glycerin

SKIN CONDITIONING - EMOLLIENT

Cetyl EthylhexanoateCetearyl Alcohol

ANTIFOAMING

Dimethicone

SURFACTANT - EMULSIFYING

PEG-40 StearateSorbitan Sesquioleate

Other ingredients

PEG-8Stearic AcidHydrogenated Vegetable OilBeeswaxArgania Spinosa Kernel OilSodium HyaluronatePhenoxyethanol1,2-HexanediolCaprylyl GlycolPentylene GlycolButyrospermum ParkiiTheobroma Cacao Seed ButterCarbomerMilk Protein ExtractAloe Barbadensis Leaf ExtractEuterpe Oleracea Fruit ExtractUreaIllicium Verum Fruit ExtractPotassium HydroxideFragranceAdenosineDisodium EDTASesamum Indicum Seed ExtractGlycyrrhiza Glabra Root ExtractCimicifuga Racemosa Root ExtractPolygonum Multiflorum Root ExtractPhellinus Linteus ExtractAngelica Gigas Root ExtractMorus Alba Bark ExtractPaeonia Lactiflora Root ExtractSophora Angustifolia Root ExtractScutellaria Baicalensis Root ExtractAllantoinMagnesium Ascorbyl PhosphateLactic AcidCitric AcidMalic AcidCeramide 3

Skim through

Ingredients explained

Hydrolyzed Collagen

Hydrolyzed protein for film-forming and moisture; molecular weight limits penetration, check source for shellfish allergies

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

PEG-8

Not decoded yet

Cetyl Ethylhexanoate

Synthetic oil providing slip; large molecule, low penetration, non-comedogenic, suitable for dry or rough skin.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

PEG-40 Stearate

Water-soluble emulsifier for O/W; mild cleansing, high levels may be comedogenic, caution for sensitive skin.

Sorbitan Sesquioleate

Non-ionic emulsifier for O/W or W/O systems; moderate emulsification power, often used with co-emulsifiers

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Hydrogenated Vegetable Oil

Occlusive emollient for smooth feel; high levels may be comedogenic, use caution for acne-prone skin

Beeswax

Beeswax, natural thickener and film former; provides occlusive moisturization, natural honey scent, animal-derived, potential allergen

Argania Spinosa Kernel Oil

Jojoba oil rich in unsaturated fats; good penetration, non-comedogenic, prone to oxidation requiring antioxidants

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Butyrospermum Parkii

African oil/fat/wax; clarify form (oil, butter, or powder) as function depends on it.

Theobroma Cacao Seed Butter

Heavy, occlusive plant butter; medium comedogenic rating, avoid on oily skin.

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Milk Protein Extract

Protein-based humectant/conditioner <5%; allergenic for lactose-sensitive, hygroscopic so needs preservative

Aloe Barbadensis Leaf Extract

Aloe vera leaf extract for soothing and humectant; monitor polysaccharide level and endotoxins

Euterpe Oleracea Fruit Extract

Açaí extract; rich in antioxidants; used for hair/skin, oil-based so needs emulsification.

Urea

Potent humectant and keratolytic, >10% has exfoliating effect; stinging sensation at high levels, sensitive skin caution

Illicium Verum Fruit Extract

Star anise extract with anethole; fragrant and conditioning, allergen present, high levels risk sensitivity.

Potassium Hydroxide

Strong alkali pH adjuster, trace usage (<0.1%); corrosive, must be neutralized.

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Sesamum Indicum Seed Extract

Sesame seed extract rich in oils and sesamin; used for hair and skin conditioning with smoothing and soothing properties.

Glycyrrhiza Glabra Root Extract

Liquorice root extract for soothing and brightening; batch variability, watch polyphenol interactions

Cimicifuga Racemosa Root Extract

Black cohosh extract, antioxidant/conditioning, phytoestrogen-like; avoid in pregnancy

Polygonum Multiflorum Root Extract

Antioxidant root extract; caution advised for long-term application

Phellinus Linteus Extract

Phellinus linteus polysaccharide at 0.1–0.5% in water phase; boosts hydration, low allergenicity

Angelica Gigas Root Extract

Angelica gigas root extract; traditional care; coumarins present, note photosensitivity.

Morus Alba Bark Extract

Mulberry bark extract for skin conditioning; niche ingredient, stability and safety data limited

Paeonia Lactiflora Root Extract

Paeon lactiflora root extract with paeoniflorin; 0.1–1%, skin conditioning; watch oxidizers.

Sophora Angustifolia Root Extract

Sophora root extract; matrine-rich with antimicrobial and anti-itch effects, used for skin conditioning.

Scutellaria Baicalensis Root Extract

Scutellaria root extract with baicalin for antioxidant and soothing effects; also provides astringent and humectant properties.

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

Magnesium Ascorbyl Phosphate

Water-soluble Vitamin C derivative for antioxidant and brightening; more stable than ascorbic acid

Lactic Acid

AHA pH adjuster at 0.5-5%; exfoliation/humectancy, mild at low conc., irritating at high, avoid conflict with alkaline preservatives.

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Malic Acid

AHA for pH buffering; mild at low conc, risk at high, control pH & total acidity

Ceramide 3

Ceramide 3 to restore skin barrier and moisturize; used at 0.01–1%, often blended

Related products in this category

• skinesque Skinesque Deep Sleep Overnight Mask
• kose-cosmeport Kose Cosmeport Princess Veil Pure White Mask
• ily ILY Peach Face Mask Sachet
• etude-house Etude House 0.2 Air Mask Hyaluronic Acid Face Mask
• rohto-mentholatum-hada-labo Rohto Mentholatum Hada Labo Koi-gokujyun 3d Lift Perfect Mask
• care-beauty-line Care & Beauty Line Face Mud Mask