iope Urban Aging™ Corrector

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Purified Water
2. Butylene Glycol
3. Hydrogenated Poly
4. Ethanol
5. Niacinamide
6. Cyclopentasiloxane
7. Resveratrol
8. Saccharomyces Ferment
9. Lactobionic Acid
10. Adenosine
11. Hydrogenated Lecithin
12. Hydrogenated Vegetable Oil
13. Glyceryl Polymethacrylate
14. Glyceryl Stearate
15. Cyclohexasiloxane
16. Cetearyl Alcohol
17. Cetyl Alcohol
18. Silica
19. Peg-75 Stearate
20. Polyacrylate-13
21. Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
22. Stearic Acid
23. Polyisobutene
24. Polyisobutene
25. Ceteth-20
26. Steareth-20
27. Glyceryl Stearate Citrate
28. Ethylhexylglycerin
29. Xanthan Gum
30. Polyglyceryl-3 Methylglucose Distearate
31. Palmitic Acid
32. Polysorbate 20
33. Methyl Methacrylate/Acrylonitrile Copolymer
34. Disodium Edta
35. Fragrance

Highlights

Free of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains alcoholContains siliconesContains animal-derivedContains PEGContains EU-26 allergensContains fragrance

Key ingredients

溶剂

Purified WaterEthanol

HUMECTANT

Butylene Glycol

油相溶剂，柔润剂

Hydrogenated Poly

SMOOTHING

Niacinamide

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

ANTIOXIDANT

Resveratrol

SKIN CONDITIONING

Saccharomyces Ferment

Other ingredients

Lactobionic AcidAdenosineHydrogenated LecithinHydrogenated Vegetable OilGlyceryl PolymethacrylateGlyceryl StearateCyclohexasiloxaneCetearyl AlcoholCetyl AlcoholSilicaPeg-75 StearatePolyacrylate-13Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate CopolymerStearic AcidPolyisobutenePolyisobuteneCeteth-20Steareth-20Glyceryl Stearate CitrateEthylhexylglycerinXanthan GumPolyglyceryl-3 Methylglucose DistearatePalmitic AcidPolysorbate 20Methyl Methacrylate/Acrylonitrile CopolymerDisodium EdtaFragrance

Skim through

Ingredients explained

Purified Water

Deionized or purified water serving as the formulation solvent base; requires protection from microbial contamination, typically constitutes the majority of the formula.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Hydrogenated Poly

Hydrogenated poly C6-14 olefins, saturated oil; occlusive, low permeability

Ethanol

Fast-evaporating solvent and enhancer; drying feel, high concentrations require irritation assessment.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Resveratrol

Potent polyphenol antioxidant <1%; light-sensitive, needs antioxidants/chelators

Saccharomyces Ferment

Yeast ferment extract with amino acids; skin conditioning agent for texture improvement, ferment filtrates may sensitize

Lactobionic Acid

Polyhydroxy acid for pH buffering; gentle, check stability at high levels

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Hydrogenated Vegetable Oil

Occlusive emollient for smooth feel; high levels may be comedogenic, use caution for acne-prone skin

Glyceryl Polymethacrylate

Acrylate polymer for high viscosity, film formation, and conditioning feel. Synthetic polymer, low irritancy.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Cetyl Alcohol

Cetyl alcohol for emulsification/thickening; high concentration >10% may irritate.

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Peg-75 Stearate

PEG-75 stearate, non-ionic emulsifier/thickener; PEG-based, check for 1,4-dioxane limits, not used in some markets.

Polyacrylate-13

Not decoded yet

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

High-molecular-weight thickener and emulsion stabilizer; requires electrolytes or acid adjustment near isoelectric point for optimal performance.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Polyisobutene

Inert film former and occlusive; increases viscosity, slippery feel, used in lipsticks

Polyisobutene

Inert film former and occlusive; increases viscosity, slippery feel, used in lipsticks

Ceteth-20

Not decoded yet

Steareth-20

Not decoded yet

Glyceryl Stearate Citrate

Emulsifying stabilizer and emollient at 2–5%; provides creamy texture, check compatibility with anionic surfactants

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Polyglyceryl-3 Methylglucose Distearate

Non-ionic emulsifier at 1–3%; mild, easily combined with other surfactants.

Palmitic Acid

Palmitic acid for emulsification/emollient; solid fat, high melting point, occlusive.

Polysorbate 20

Non-ionic emulsifier and cleansing surfactant; contains PEG, control microbial load.

Methyl Methacrylate/Acrylonitrile Copolymer

Not decoded yet

Disodium Edta

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Related products in this category

• a-florence-skincare A.Florence Skincare Hydration Booster Mist
• a-florence-skincare A.Florence Skincare Skin Barrier Restoring Oil
• im-from I'm From Mugwort Spot Gel
• im-from I'm From Mugwort Sheet Mask
• im-from I'm From Ginseng Eye Cream (Discontinued)
• pixi Pixi Retinol Eye Cream